33 52 012 Replacing rear left or right side shock absorber

WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

2 355 965
2 355 966

IMPORTANT:

When replacing the shock absorber, replace the auxiliary damper as well.
Read and comply with INFORMATION ON REPLACING SHOCK ABSORBERS.

Installation note:

All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
Retaining elements on chassis and suspension and steering parts must be replaced.

Necessary preliminary tasks:

Remove the SHOCK ABSORBER .

Remove protective cap (1) and sealing washer (2).

Installation note:

Replace the faulty components.

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) with special tool 2 355 965 and 2 355 966.

Tightening torque, refer to: 33 52 2AZ .

Installation note:

Replace nut.

Courtesy of BMW OF NORTH AMERICA, INC.

Impact screwdrivers are prohibited!

Refer to: RISK OF DAMAGE INSIDE THE SHOCK ABSORBER!

Replace auxiliary damper with protective tube (1).

Courtesy of BMW OF NORTH AMERICA, INC.