11 33 062 Replacing all hydraulic valve clearance compensation (HVA) elements (B48B)

WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

11 4 480

When reused, the hydraulic valve clearance compensating elements must be fitted at the same position.

Necessary preliminary work:

Remove ALL ROCKER ARMS

Remove all hydraulic valve clearance compensating elements (1) in direction of arrow.

NOTE: If hydraulic valve clearance compensating elements (1) are reused, they must be placed together with rocker arms in neat order in special tool 11 4 480 .

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install all hydraulic valve clearance compensating elements (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install ALL ROCKER ARMS