11 12 719 Grinding cylinder head lower face (B48B)

WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove CYLINDER HEAD .
Check CYLINDER HEAD FOR WATERTIGHTNESS

Check evenness of cylinder head lower face with a standard straightedge (1).

NOTE: Max. deviation from flatness (longitudinal) 0.10 mm

Courtesy of BMW OF NORTH AMERICA, INC.

Check evenness of cylinder head lower face with a standard straightedge (1).

NOTE: Max. deviation from flatness (transverse) 0.05 mm

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Installing the CYLINDER HEAD