REP-TAT-P-1712-02 Install the coolant hose from the cylinder head to the coolant expansion tank
WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
- Lay and install the coolant hose (2) below the intake plenum.
- Connect coolant hose (2) to the coolant expansion tank (1) and audibly lock it.
- Connect the coolant hose (1) to the cylinder head and audibly lock.
- Secure the coolant hose (2) with the clamp (1).
Follow-up work
- Install the ALTERNATOR
- Fasten the AIR CONDITIONING COMPRESSOR
- Install the THROTTLE BODY
- Install the ALTERNATOR DRIVE BELT
- Install the FRONT ACOUSTIC COVER
- Install the CHARGE AIR LINE
- Install the REAR ACOUSTIC COVER
- Install the BATTERY EARTH LEAD
- Install the FRONT UNDERBODY PROTECTION