11 00... Removing and installing/replacing rear acoustic cover (corrosion protection) (B48B)

WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove CENTER BULKHEAD UPPER PART SOUND INSULATION

Removal:

Feed out acoustic cover (1) upwards, out of the guides in the marked area.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Position the acoustic cover (1).

NOTE: Note the correct installation of the acoustic cover at the guides in the marked area.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

INSTALL CENTER BULKHEAD UPPER PART SOUND INSULATION
Add final details to vehicle