33 52 012 Replacing rear left or right side shock absorber
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 2 355 965
- 2 355 966
IMPORTANT:
- When replacing the shock absorber, replace the auxiliary damper as well.
- Read and comply with INFORMATION ON REPLACING SHOCK ABSORBERS.
Installation note:
- All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
- Retaining elements on chassis and suspension and steering parts must be replaced.
Necessary preliminary tasks:
- Remove the SHOCK ABSORBER .
Remove protective cap (1) and sealing washer (2).
Installation note:
Replace the faulty components.
Release nut (1) with special tool 2 355 965 and 2 355 966.
Tightening torque 33 52 2AZ .
Installation note:
Replace nut.
Impact screwdrivers are prohibited!
Risk of damage inside the shock absorber!
Replace auxiliary damper with protective tube (1).