33 52 Shock Absorbers
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
3352 SHOCK ABSORBERS - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Instructions | Torque Specification | |
|---|---|---|---|---|
| 1AZ Nut and locknut/self-locking nut | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | Replace screw. | 28 Nm |
| 2AZ Support bearing on shock absorber | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M10 | Replace nut. | 38 Nm |
| 3AZ Shock absorber to camber arm | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Replace screw and nut. | |
| Tighten down in NORMAL POSITION | ||||
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90° |