31 35 000 Removing and installing/replacing front anti-roll bar
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Refer to REMOVING ANTI-ROLL BAR LINKS FROM ANTI-ROLL BAR
- Refer to LOWERING FRONT AXLE SUPPORT
Unscrew nuts (1).
Tightening torque 31 35 1AZ .
Remove retaining brackets.
Remove anti-roll bar (2) forward.
Installation note:
Replace nuts (1).
Check both rubber mounts for damage.
- In the event of rubber mount damage, the anti-roll bar must be replaced.