31 35 005 Removing and installing anti-roll bar link for left or right anti-roll bar
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
Risk of damage!
- Avoid bending the head of the anti-roll bar during assembly!
- An impact screwdriver must not be used!
Necessary preliminary tasks:
- Refer to REMOVING FRONT WHEEL
IMPORTANT:
It is important to counterhold Torx socket when loosening push rod screw connection (1).
Unscrew nuts (1).
Tightening torque 31 35 2AZ .
Remove anti-roll bar link (2).
Installation note:
Replace self-locking nuts.