31 35 000 Removing and installing/replacing front anti-roll bar
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove the ANTI-ROLL BAR LINKS FROM ANTI-ROLL BAR .
- Lower the FRONT AXLE SUPPORT .
Unscrew nuts (1).
Tightening torque, refer to: 31 35 1AZ .
Remove retaining brackets.
Remove anti-roll bar (2) forward.
Installation note:
Replace nuts (1).
Check both rubber mounts for damage.
- In the event of rubber mount damage, the anti-roll bar must be replaced.