22 11 001 Replacing right engine mount

WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove the right ENGINE SUPPORT ARM .

Removal:

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove engine mount (2).

Installation:

Courtesy of BMW OF NORTH AMERICA, INC.

Rubber part (1) of engine mount must point to center of vehicle.

Install engine mount (2).

Tighten down screws (1).

Tightening torque, refer to: 22 11 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install ENGINE SUPPORT ARM on right.