32 00 620 Adjusting rear axle (X6 2015-2019)
NOTE:
A camber change always means a toe change as well. The camber must therefore be adjusted first.
NOTE:
Vehicles with ACC only:
- After an adjustment of the rear axle which alters the driving axis, check ADJUSTMENT OF ACC SENSOR .
Adjusting camber:
Replace eccentric screw (1) and nut (2) prior to adjustment and tighten to 5 Nm.
Turn eccentric bolt (1) to adjust camber to setpoint value.
Tighten nut (2).
Tightening torque 33 32 2AZ .
Adjusting toe:
Replace eccentric screw (1) and nut (2) prior to adjustment and tighten to 5 Nm.
Turn eccentric bolt (1) to adjust toe to setpoint value.
Tighten nut (2).
Tightening torque 33 32 5AZ .