3332 Trailing Arms And Struts
3332 AXLE GUIDE AND AXLE STRUT - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Swinging arm to rear axle carrier, front | F15/F16/F85/F86 | M12 | Replace screw and nut. TIGHTENING IN NORMAL POSITION . Joining torque Angle of rotation |
100 Nm 90° |
| 2AZ Swinging arm to rear axle support, rear | F15/F16/F85/F86 | M16 | Replace eccentric bolt and nut. TIGHTENING IN NORMAL POSITION . |
250 Nm |
| 3AZ Swinging arm to wheel carrier/integral link | F15/F16/F85/F86 | M16 | Replace screw and nut. Joining torque Angle of rotation |
130 Nm 180° |
| 4AZ Integral link to wheel carrier | F15/F16/F85/F86 | M12 | 100 Nm | |
| 5AZ Control arm to rear axle support | F15/F16/F85/F86 | M14 | Replace eccentric bolt and nut. TIGHTENING IN NORMAL POSITION . |
100 Nm |
| 6AZ Control arm to wheel carrier | F15/F16/F85/F86 | M12 | Replace nut. | 100 Nm |
| 7AZ Control arm to rear axle support | F15/F16/F85/F86 | M12 | Replace screw and nut. TIGHTENING IN NORMAL POSITION . Joining torque Angle of rotation |
100 Nm 90° |
| 8AZ Wishbone to wheel carrier | F15/F16/F85/F86 | M14 | Replace nut. | 165 Nm |