61 31 008 Removing and installing (replacing) steering column switch cluster (X6 2015-2019)
WARNING:
Move wheels into straight-ahead position and do not alter this position during the repair work.
Do not under any circumstances turn the steering column switch cluster when the steering wheel is removed.
Do not under any circumstances turn the steering column switch cluster when the steering wheel is removed.
Necessary preliminary tasks:
- Remove steering wheel. Refer to 32 33 000 REMOVING AND INSTALLING/REPLACING STEERING WHEEL REP-REP-RAF1532-3233000 - V.4 (X6 2015-2019) , 32 33 000 REMOVING AND INSTALLING/REPLACING SPORT STEERING WHEEL REP-REP-RAF1532-3233010 - V.7 (X6 2015-2019) or 32 33 010 REMOVING AND INSTALLING (REPLACING) M SPORTS STEERING WHEEL REP-REP-RAF1532-3233010 MLENKRAD - V.10 (X6 2015-2019) .
- REMOVING LOWER SECTION OF STEERING COLUMN TRIM .
Removal:
Release screws (1).
Remove steering column switch cluster (2) in direction of arrow.
Disconnect plug connection (1).
Remove steering column switch cluster (2).
Installation:
Connect the connector (1).
Installation note:
Check the neutral position of the clock spring on the steering column switch cluster.
Neutral position is correct only when the green or yellow mark (1) is clearly visible!
Install the steering column switch cluster (2) in direction of arrow.
Tighten down screws (1).
Tightening torque 61 31 3AZ .
Required follow-up work:
- Install steering wheel. Refer to 32 33 000 REMOVING AND INSTALLING/REPLACING STEERING WHEEL REP-REP-RAF1532-3233000 - V.4 (X6 2015-2019) , 32 33 000 REMOVING AND INSTALLING/REPLACING SPORT STEERING WHEEL REP-REP-RAF1532-3233010 - V.7 (X6 2015-2019) or 32 33 010 REMOVING AND INSTALLING (REPLACING) M SPORTS STEERING WHEEL REP-REP-RAF1532-3233010 MLENKRAD - V.10 (X6 2015-2019) .
- INSTALLING STEERING COLUMN SHROUD LOWER SECTION .