66 20 515 Removing and installing/replacing a front left ultrasonic transducer (X6 2015-2019)

Necessary preliminary tasks: 

• Partially detach front left WHEEL ARCH COVER .

On version with auxiliary radiator: 

• Remove FRONT BUMPER PANEL .

Unfasten plug connection (1) and disconnect.

Unlock latch mechanisms (2) and pull ultrasonic transducer (3) out of bracket.

Installation note: 

Retaining tabs (2) must not be damaged!

Make sure ultrasonic sensor is securely seated.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Make sure rubber ring (1) is correctly seated on ultrasonic sensor (2).

Courtesy of BMW OF NORTH AMERICA, INC.