Removing and installing/replacing cover on window frame (rear door) at inside left or right (X6 M)

Necessary preliminary tasks: 

• Open side window
• Remove REAR DOOR TRIM PANEL .

Equipment specification with roller sunblind: 

Lift off cover (1).

Undo the screw underneath and take off hook (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Detach cover (1) at clips (2).

Lever out cover (1) in direction of arrow and remove.

Installation note: 

Make sure cover (1) is correctly seated on seal (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Correctly feed cover (2) into joint of rubber window seal (1).

Courtesy of BMW OF NORTH AMERICA, INC.