Removing And Installing The Engine Compartment Lid (Active Pedestrian Protection) Rep-Rep-RAF1541-4161010 - V.5 (X6 M)
WARNING:
Danger of injury!
The BATTERY EARTH LEAD must be clamped off prior to work on the hinge or engine compartment lid!
Adhere to the following SAFETY INFORMATION so as to avoid a danger of injury by the actuator.
IMPORTANT:
Use suitable tool to support bonnet in the fully opened position.
Removal of the engine compartment lid must be carried out with the assistance of a second person.
Removal of the engine compartment lid must be carried out with the assistance of a second person.
For stripping and rigging operations, refer to texts on KSD CD (FRU number 41 61 010).
Follow instructions on Active pedestrian protection system.
Necessary preliminary tasks:
Disconnect BATTERY NEGATIVE LEAD .
Release the lock (1) and detach the water hose (2).
Unfasten plug connection (3) and disconnect.
Unscrew nuts (1).
Remove engine compartment lid.
Installation note:
Install engine compartment lid at screw locations to on hinge.
Tightening torque 41 61 1AZ .
If necessary, adjust ENGINE COMPARTMENT LID .