Remove and install (replace) the power window regulator in the left or right front door (X6 M)

NOTE: Disengage, but do not remove, the door window glass and secure it in the window frame.

Necessary preliminary tasks:

Release cable in area (A) from holder.

Release nuts (1) and feed out rear section of power window unit (2).

Tightening torque 51 33 2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken nuts (1) and carefully remove front section of power window regulator (2).

Tightening torque 51 33 2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: