51 45 380 Removing and installing (replacing) right decorative strip on dashboard

Special tools required:

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Necessary preliminary tasks:

Release decorative strip (1) from clips (2) using special tool 00 9 325 , starting from the outside.

Lift off decorative strip (1) slightly and disconnect underlying plug connection.

Remove decorative strip (1).

Installation note:

Replace faulty clamps (2).

Fig 1: Releasing Decorative Strip From Clips Using Special Tool (00 9 325)

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: