51 16 165 Removing and installing/replacing complete center console

Special tools required:

Necessary preliminary tasks:

Equipment specification with telephone:

IMPORTANT: Read and comply with notes on HANDLING WIRING HARNESSES and cables.

Remove cover (1) using special tool 00 9 327 from clamps (2).

Fig 1: Removing Cover Using Special Tool (00 9 327)

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover (1) at latch mechanisms (2) using special tool 00 9 340 from storage box (3).

Unlock associated plug connections and disconnect.

Fig 2: Identifying Storage Box, Cover And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cable clip (1) and feed through wiring harness.

Fig 3: Identifying Cable Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Release screws (2) on left/right.

Unfasten cable clip (3).

Pull out center console towards rear and watch out for other plug connections.

Remove center console towards top rear.

Fig 4: Identifying Plug Connection, Cable Clip And Screws

Courtesy of BMW OF NORTH AMERICA, INC.