84 10 700 Removing and installing/replacing base plate

Necessary preliminary tasks:

Remove rubber grommet (1).

Release screws underneath.

Unfasten screws (2).

Remove cover (3) in direction of arrow.

Fig 1: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and open cable clip (1).

Release base plate (4) from latch mechanisms (2).

Feed out cable (3).

Remove base plate (4).

Installation note:

Ensure correct cable routing.

Fig 2: Identifying Cable Clip, Base Plate And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect the connectors (1).

Feed out associated cables.

Remove base plate.

Installation note:

Ensure correct cable routing.

Fig 3: Identifying Connectors

Courtesy of BMW OF NORTH AMERICA, INC.