Removing and installing/replacing cover for loading edge (at tailgate lower section) (X5 M)

Necessary preliminary tasks: 

• Remove TRIM FOR REAR LID LOWER SECTION .

Lift off cover (1), slacken screw and remove handle (2).

Tightening torque 51 24 6AZ .

Lever out cover (3) and release screw underneath.

Tightening torque 51 49 9AZ .

Installation note: 

Replace faulty covers (1 and 2).

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen cover (1) at clips (2) and carefully remove.

Installation note: 

Replace faulty clips (2).

Courtesy of BMW OF NORTH AMERICA, INC.