LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X4 M40i >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair >> Trim, Covers, Handle Trim >> 51 13 307 Removing and installing/replacing left or right roof rails (version with panorama glass roof)

51 13 307 Removing and installing/replacing left or right roof rails (version with panorama glass roof)

Special tools required: 

WARNING: Observe SAFETY INFORMATION when handling airbag modules. Incorrect handling can activate airbag and cause injury. 

Switch off the ignition!

Necessary preliminary work:

To detach the clamps, use special tool 0 496 932.

Push the left and right tabs together and pull clamp out.

Fig 1: Locating Left/Right Tabs
G09948081Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and remove clamp (1) with flat-nose pliers.

Fig 2: Removing Clamp With Flat-Nose Pliers
G09948082Courtesy of BMW OF NORTH AMERICA, INC.

Slightly press airbag (1) to the side and release nuts (2).

Tightening torque 51 13 4AZ .

Fig 3: Identifying Airbag Side And Nuts
G09948083Courtesy of BMW OF NORTH AMERICA, INC.

Remove roof railing (1) in direction of arrow.

Fig 4: Removing Roof Railing
G09948084Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Following parts must not be damaged or missing:

  1. Stud
  2. Gasket
  3. Welt strip
Fig 5: Identifying Stud, Gasket And Welt Strip
G09948085Courtesy of BMW OF NORTH AMERICA, INC.