51 37 000 Removing and installing/replacing complete rear left or right power window regulator
IMPORTANT:
Before replacement of power window regulator, pay attention to NOTES on installation status!
NOTE:
Disengage, but do not remove, the door window and secure in the door window frame.
The cover on the window frame does not need to be removed.
The cover on the window frame does not need to be removed.
Necessary preliminary tasks:
- Remove REAR DOOR WINDOW GLASS
Unlock plug connection for flat motor and disconnect.
Release nuts (1) and feed out power window regulator (2).
Tightening torque 51 35 2AZ .
Replacement
Swap over FLAT MOTOR FOR POWER WINDOW REGULATOR .