84 21 548 Removing and installing (replacing) hands-free charging electronics (High)

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

NOTE: Comply with notes and instructions on HANDLING OPTICAL FIBERS .

Necessary preliminary tasks:

Disconnect BATTERY NEGATIVE LEAD
If necessary, remove amplifier. See REMOVING AND INSTALLING AMPLIFIER (HIFI SYSTEM) or REMOVING AND INSTALLING AMPLIFIER (TOP HIFI SYSTEM) .
If necessary, remove TELEMATICS CONTROL UNIT

Disconnect plug connection (1).

Release all nuts.

Remove hands-free charging electronics (2) from bracket (3).

Installation:

Make sure wiring harness is correctly laid.

Fig 1: Identifying Hands-Free Charging Electronics And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/CODING
If necessary, log mobile phone on to vehicle