65 12 071 Removing and installing/replacing amplifier (HiFi system)

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

NOTE: Comply with notes and instructions on HANDLING OPTICAL FIBRES .

Necessary preliminary work:

Disconnect BATTERY EARTH LEAD
Remove FLAP IN LUGGAGE COMPARTMENT TRIM PANEL ON LEFT

Release screw (1).

Disconnect plug connection (2) and slide amplifier (3) in direction of arrow out of bracket.

Fig 1: Removing Amplifier

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Tabs (1) must be correctly slid into guide (2).

Check that amplifier (3) is securely seated.

Fig 2: Identifying Amplifier, Tabs And Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

For vehicle with production date up to 09/2010 , carry out conversion in the diagnosis system via path:

Vehicle
Conversions
Conversion Hi-Fi system

NOTE: On vehicle with production date after 09/2010 , no vehicle programming/encoding needs to be carried out!