84 10 050 Removing and installing (replacing) USB hub

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Remove GEAR SELECTOR SWITCH CARRIER

Unlock catch (1) and guide USB hub (2) in direction of arrow out of holder (3).

Disconnect plug connection (4).

Fig 1: Removing USB Hub

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure USB hub (2) is correctly seated in holder (3).

Make sure wiring harness is correctly laid.