22 11 100 Replacing right engine support arm (N63, S63)
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Secure . See 11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N63) engine in installation position.
- Remove UNDERBODY PROTECTION .
- Remove reinforcement plate . See 31 10 010 REMOVING AND INSTALLING/REPLACING REINFORCEMENT PLATE .
- Release TRACK ROD on steering box.
Release screws and engine support arm.
Tightening torque: 22 11 3AZ .