22 11 001 Replacing right engine mount (N63, S63)

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove ENGINE SUPPORT ARM .

Release screws (1) and remove engine mount (2).

Tightening torque: 22 11 1AZ .

Fig 1: Identifying Screws And Engine Mount

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Holes (1) in engine mount must point to center of vehicle.

Fig 2: Identifying Holes In Engine Mount

Courtesy of BMW OF NORTH AMERICA, INC.