24 34... Notes on mechatronics (GA6HP26Z/GA6HP32Z/GA6HP19Z)
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
After completing repair work:
- Load specific data status with the BMW diagnosis system.
- Check transmission oil level
. See 00 11 500 CHECKING/TOPPING UP OIL LEVEL IN AUTOMATIC TRANSMISSION (GA6HP26Z)
.
Use only approved transmission oil. See AUTOMATIC TRANSMISSION -- OPERATING FLUIDS or DUAL-CLUTCH TRANSMISSION -- OPERATING FLUIDS .
Failure to comply with this requirement will result in serious damage to the automatic transmission!
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION)
.
Unscrew connector (1) and disconnect.
Insert special tool 24 2 390 in sealing sleeve (1).