11 00 Mounting engine on assembly stand (M57T2)

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 1 450
00 2 300
11 6 090

Necessary preliminary tasks:

Remove engine. See 11 00 050 REMOVING AND INSTALLING ENGINE (M57T2) .

Secure special tool 11 6 090 to crankcase.

Tighten screws uniformly.

Secure engine with special tool 11 6 090 to assembly stand 00 2 300 /00 1 450 .

Fig 1: Securing Engine With Special Tool (11 6 090) To Assembly Stand (00 2 300)

Courtesy of BMW OF NORTH AMERICA, INC.