72 11 101 Removing And Installing/Replacing Rear Center Seat Belt (Automatic Reel)
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Partially remove BACKREST COVER .
- Remove REAR SEAT .
Unscrew nut (1).
Tightening torque: 72 11 20AZ .
Remove inertia reel mechanism (2).
Installation:
Inertia reel mechanism (2) is coded against incorrect installation.
Feed anchor fitting out of backrest cover and backrest frame.