72 11 092 Removing And Installing/Replacing Rear Left Or Right Seat Belt

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove REAR SEAT .
Version with 3rd seat row only:
Fold rear seat forwards.
Remove ADAPTER PLATE .

Release screw (1) on end fitting.

Installation:

Replace screw.

Tightening torque: 72 11 21AZ .

Fig 1: Screw On End Fitting

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Installation:

Replace screws.

Tightening torque: 72 11 24AZ .

Remove belt deflector (2).

Release screws (3).

Tightening torque: 72 11 23AZ .

Remove deflector bar (4).

Fig 2: Belt Deflector and Deflector Bar With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Installation:

Replace screws.

Tightening torque: 72 11 20AZ .

Remove automatic reel (2).

Installation:

Inertia reel unit is coded against incorrect installation (2).

Fig 3: Inertia Reel Unit With Screws

Courtesy of BMW OF NORTH AMERICA, INC.