72 12 006 Removing and installing/replacing airbag module for passenger knee protection
WARNING:
Read and comply with SAFETY REGULATIONS FOR HANDLING AIRBAG MODULES AND PYROTECHNICAL BELT PRETENSIONERS .
Incorrect handling can activate airbag and cause injury.
Incorrect handling can activate airbag and cause injury.
IMPORTANT:
Operations on pyrotechnical devices may only be carried out by authorized experts.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.
Necessary preliminary tasks:
- Disconnect the BATTERY EARTH LEAD
- Lower the INSTRUMENT PANEL TRIM
Removal:
Unlock PLUG CONNECTION on airbag module (2) and disconnect.
Loosen the screws (1) and remove the airbag module (2).
Installation:
Connect PLUG CONNECTION on airbag module (2) and lock.
Install the airbag module (2) and tighten the screws (1).
Tightening torque, refer to: 72 12 02AZ .
Required follow-up work:
- Connect the BATTERY EARTH LEAD
- Install the BOTTOM INSTRUMENT PANEL TRIM