51 24 100 Removing and installing/replacing tailgate lock

Necessary preliminary tasks: 

• Remove trim for rear lid. See 51 49 000 REMOVING AND INSTALLING OR REPLACING TRIM FOR REAR LID .

Version with reversing camera: 

• Remove REVERSING CAMERA

Unlock plug connections (1) and disconnect.

Release screws.

Tightening torque 51 24 1AZ .

Feed out rear lid lock.

Fig 1: Locating Tailgate Lock Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Perform function check with tailgate open.