51 49 000 Removing and installing or replacing trim for rear lid

Necessary preliminary tasks:

F06/F13 only:

Remove warning triangle (1) from bracket.

Release screws (2) and remove warning triangle holder.

Fig 1: Identifying Warning Triangle And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, detach Bowden cable from emergency release (2).

Loosen expanding rivet.

If necessary, feed out Bowden cable from emergency release (2).

Remove trim panel (2).

Installation note:

Replace faulty expanding rivets.

Fig 2: Locating Trim Panel And Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.