62 30 010 Removing and installing/replacing head-up display
Attention!
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .
Attention!
Comply with notes on HANDLING OPTICAL FIBRES .
Risk of damage!
Do not scratch glass pane of head-up display.
Necessary preliminary tasks:
- Remove INSTRUMENT PANEL TRIM
NOTE:
Similar to graphic.
Remove seal (1) from head-up display (2).
Loosen screws (3).
Tightening torque: 62 30 1AZ .
Carefully feed out head-up display (2) in upward direction.
Unlock plug connection (1) on underside of head-up display (2) and disconnect.
Remove head-up display (2).
Installation note:
Clean the glass pane of the Head-Up Display.
Adjust HEAD-UP DISPLAY .
Replacement:
NOTE:
When replacing
the Head-Up Display in vehicles with production date up to 03/2017
it is necessary to PROGRAM
the instrument cluster