63 11 820 Replacing left cornering light LED module

Necessary preliminary tasks:

Release screws (1).

Tightening torque: 63 11 2AZ .

Remove LED module (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Remove LED module (2).

Installation note:

Gasket (3) for LED module (2) must not be damaged and must be installed free from grease.

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1) and take off reflector (2) from LED module (3).

Courtesy of BMW OF NORTH AMERICA, INC.