63 11 800 Replacing left LED main light module left

Attention! 

Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks: 

• Remove HEADLIGHT 

Release screws (1).

Tightening torque: 63 11 1AZ .

Remove LED main light module (2) from headlight (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Gasket (1) for LED main light module (2) must not be damaged and must be installed free from grease.

Make sure LED main light module (2) is correctly installed.

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out PROGRAMMING/ENCODING .