63 10 004 Adjusting headlights

COMPLY  with test prerequisites for headlight adjustment.

For F30, F31, F35, F80: 

Carry out headlight adjustment at adjusting screws (1) and (2).

1. Adjustment screw primarily for vertical adjustment
2. Adjusting screw primarily for lateral adjustment
3. Adjust the height at the adjusting screw (1)

   US version only: 

   Only carry out the setting of the lateral adjustment when the safety web in the adjusting screw for the lateral adjustment is MISSING OR IS DAMAGED .

   If necessary, remove the damaged plug

4. Make the lateral adjustment at the adjusting screw (2)

Courtesy of BMW OF NORTH AMERICA, INC.

After headlight adjustment: 

Perform reference run. For this purpose, switch off and on the headlights. Check again headlight adjustment.

US version only: 

If the lateral adjustment is checked or corrected, press the new plug into the ADJUSTING SCREW FOR THE LATERAL ADJUSTMENT without any damage  .