63 31 187 Removing and installing/replacing LED for left or right door post trim panel
Necessary preliminary tasks:
- Partially remove TRIM PANEL FOR TOP OF DOOR POST
NOTE:
Work shown on the F30 by way of example, deviations in detail are possible in other models.
Unlock and disconnect plug connection (1) on door post.
Lever out cable at cable clip (2) from door post.
NOTE:
Work shown on the F30 by way of example, deviations in detail are possible in other models.
Graphic shows trim panel (3) removed.
Graphic shows trim panel (3) removed.
Carefully lever out LED module (1) from holder (2) with a suitable tool.
Lever out cable at cable clip (4) from trim panel (3) and remove LED module (1).
Installation note:
Make sure LED module (1) is correctly fitted in holder (2).
Cable clips (4) must not be missing or damaged.
Ensure correct cable routing.