Installing the instrument cluster (KOMBI)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .

Protect working area.
Handle tools and components carefully.

Connect and lock all connectors (1) to the instrument cluster (KOMBI).

Courtesy of BMW OF NORTH AMERICA, INC.
Make sure that the retaining tabs (1) of the instrument cluster (KOMBI) (2) are seated exactly in mountings of the instrument panel.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the instrument cluster (KOMBI) position in the opposite direction of the arrow.

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Instrument cluster to instrument panel
Screw	Tightening torque	1.7 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to CONNECTING THE BATTERY EARTH LEAD .