Remove roller sun blind
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
Preliminary work
- Refer to REMOVING THE DOOR SILL COVER STRIP ON THE REAR LEFT AND RIGHT .
- Refer to REMOVING THE BOTTOM LEFT AND RIGHT C-PILLAR TRIM PANELS .
- Refer to REMOVING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .
- Refer to REMOVING THE COMPACT SPARE WHEEL .
- Refer to REMOVING THE VEHICLE TOOL KIT .
- Refer to REMOVING THE HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
- Refer to REMOVING THE LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to REMOVING THE LOADING EDGE TRIM .
- Refer to REMOVING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON LEFT .
- Refer to REMOVING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to REMOVING THE TRIM PANEL OF THE LUGGAGE COMPARTMENT CAPPING ON THE LEFT AND RIGHT .
- Refer to REMOVING ALL GRAB HANDLES .
- Refer to REMOVING THE COVER ON THE INSIDE MIRROR .
- Refer to REMOVING THE LEFT AND RIGHT SUN VISOR .
- Refer to REMOVING COUNTER SUPPORTS FOR SUN VISOR ON LEFT AND RIGHT .
- Refer to REMOVING THE ROOF FUNCTION CENTER .
- Refer to REMOVING THE LEFT AND RIGHT A-PILLAR TRIM PANELS .
- Refer to REMOVING THE B-PILLAR TRIM PANELS AT TOP LEFT AND RIGHT .
- Refer to REMOVING THE BELT FEED TRIM .
- Refer to LOWERING THE HEADLINING (WITH PANORAMA GLASS ROOF) .
- Refer to REMOVING THE FRONT PANORAMA GLASS ROOF PANEL .
- Refer to REMOVING COMPLETE PANORAMA GLASS ROOF .
- Refer to REMOVING THE REAR PANORAMA GLASS ROOF PANEL .
NOTE:
RISK OF DAMAGE
Heavy component.
Heavy components can lead to injury or damage.
Heavy component.
Heavy components can lead to injury or damage.
- Remove and install heavy components with the aid of another person/other persons.
- Always carry the panoramic roof (1) with a support person and only at the marked areas (2) .
- Manually open the roller sunblind (1)
until it is in the area of the notch (2)
.NOTE: RISK OF DAMAGE
Damage to the sun blind rollers.
The preloaded spring of the electrically motorized reel will detach when the roller sunblind is not disconnected.- Disconnect the roller sunblind with a suitable tool with 0 2 mm.
- Feed the holding fixture (1) completely into the opening (2) .
- If applicable, manually move the roller sunblind until the holding fixture (1)
can be completely fed in.
The preload cannot be restored afterwards.
- Further manually open the roller sunblind (1) approx. 2 cm.
- Turn the roller sunblind (1)
with the holding fixture (2)
on the right mount (3)
in arrow direction and feed out upwards.
- Detach the roller sunblind (1) from the left and right mount.
- Slightly lift the lug (2) on the slider and lift it over the detent (3) of the driver.
- Detach the slider towards the front from the driver.
- Feed the roller sunblind (1) out of the frame.
- Carefully place the roller sun blind (1)
on the lowered roof lining.