Installing the right footwell flap motor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Correctly position the footwell flap motor (3) .
- Tighten down screws (2)
.NOTE: In case of difficult accessibility, tighten the screws (2) with the special tool 2 359 116 .TIGHTENING TORQUE SPECIFICATIONS
Heater/air conditioner Screw tightening torque 1.2 Nm - Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING RIGHT FOOTWELL VENTILATION DUCT .
- Refer to INSTALLING RIGHT GLOVE COMPARTMENT .
- Refer to INSTALLING KNEE AIRBAG .
- Refer to INSTALLING THE SIDE PANEL ON INSTRUMENT PANEL ON THE RIGHT .
- Refer to INSTALLING THE BOTTOM RIGHT INSTRUMENT PANEL TRIM .
- Refer to CONNECTING THE BATTERY EARTH LEAD .
- Refer to ADDRESSING THE CONTROLLER DRIVE .