Installing the airbag sensor on the B-pillar
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Correctly position the airbag sensor (3) on the B pillar.
- Tighten down screw (2)
.TIGHTENING TORQUE SPECIFICATIONS
Airbag sensor, B-pillar M6 Tightening torque 8.8 Nm - Connect plug (1) .
Follow-up work
- Refer to INSTALLING THE LOWER B-PILLAR TRIM PANEL .
- Refer to PARTIALLY INSTALLING UPPER RIGHT B-PILLAR TRIM PANEL .
- Refer to INSTALLING REAR RIGHT DOOR SILL COVER STRIP .
- Refer to INSTALLING THE FRONT RIGHT DOOR SILL COVER STRIP .
- Refer to CONNECTING THE BATTERY EARTH LEAD .