Installing the wave trap
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Correctly position wave trap (3) .
- Tighten down screw (2)
.TIGHTENING TORQUE SPECIFICATIONS
Antenna amplifier/interference suppression filter/band elimination circuit to body Screw Tightening torque 3.3 Nm - Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING THE TRIM PANEL FOR THE RIGHT LUGGAGE COMPARTMENT CAPPING .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
- Refer to INSTALLING THE C-PILLAR TRIM PANEL AT THE BOTTOM RIGHT .
- Refer to INSTALLING REAR RIGHT DOOR SILL COVER STRIP .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
- Refer to INSTALLING TOOLKITS .
- Refer to INSTALLING THE EMERGENCY WHEEL .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .