Installing the audio amplifier
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Install audio amplifier (1) completely with holder.
- Feed in guides (2)
.
- Engage audio amplifier with the holder (4) downwards into the latch mechanism (3) .
- Tighten the screws (2)
.TIGHTENING TORQUE SPECIFICATIONS
Holder to body screw Tightening torque 5 Nm - Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL AT LEFT .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
- Refer to INSTALLING TOOLKITS .
- Refer to INSTALLING THE EMERGENCY WHEEL .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .
- Refer to CONNECTING THE BATTERY EARTH LEAD .
- Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .