Install the backrest frame of the front seat-backrest
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Position the backrest frame (2) .
- Replace screws (1)
.
Parts: Screw
- Tighten screws (1)
on the left and right.TIGHTENING TORQUE SPECIFICATIONS
Backrest frame on seat mechanism Screw
Replace screw.Tightening torque 44 Nm - Equipment specification with ISOFIX only:
Secure the holder (2) with the rivets (1) .
- Feed in the vehicle wiring harness on the backrest frame.
- Secure cable with the clips (1)
to the backrest frame.
Follow-up work
- Refer to INSTALLING THE BACKREST WIDTH ADJUSTMENT WITH VALVE .
- Refer to INSTALLING THE LUMBAR SUPPORT WITH PUMP .
- Refer to INSTALLING THE BACKREST COVER WITH THE CUSHION FOR THE FRONT SEAT .
- Refer to INSTALLING SIDE AIRBAG IN FRONT SEAT .
- Refer to INSTALLING THE REAR PANEL ON THE FRONT SEAT BACKREST .
- Refer to INSTALLING THE INNER COVER ON THE FRONT SEAT .
- Refer to INSTALLING THE OUTER COVER ON THE FRONT SEAT (MECHANICAL) .
- Refer to INSTALLING BACKREST ADJUSTMENT LEVER ON FRONT SEAT .
- Refer to INSTALLING THE LEVER FOR THE SEAT HEIGHT ADJUSTMENT ON FRONT SEAT .
- Refer to INSTALLING GUIDE SLEEVE FOR FRONT HEAD RESTRAINT .
- Refer to INSTALLING THE HEAD RESTRAINT IN FRONT .
- Refer to INSTALLING FRONT SEAT .
- Refer to INSTALLING THE FRONT STRAP FITTING .