Install the flat motor for the rear power window
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Engage the flat motor (2) precisely at the marked points on the power window (1).
- Tighten the screws (1) for the flat motor (2) at the same time.TIGHTENING TORQUE SPECIFICATIONS
Flat motor to power window regulator Screw tightening torque 7 Nm
Follow-up work
- Refer to INSTALLING REAR POWER WINDOW REGULATOR .
- Refer to INSTALLING THE SOUND INSULATION ON THE REAR DOOR .
- Refer to INSTALLING REAR DOOR TRIM PANEL .
- Refer to INSTALLING THE COVER ON THE DOOR HANDLE .
- Refer to INITIALIZING THE POWER WINDOWS .