Installing rear power window regulator
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Feed in and position the power windows (3) in the door.
- Tighten nuts (2).TIGHTENING TORQUE SPECIFICATIONS
Power electric windows to door Nut M6, self-locking tightening torque 9.5 Nm - Connect plug connection (1) and lock.
- Remove adhesive tape (2) from the door window glass (1).
- Slide the door window glass (1) downward and engage into the stop of the fixture (2).
- Make sure that the door window glass (1) correctly engages into fixture (2).
Follow-up work
- Refer to INSTALLING THE SOUND INSULATION ON THE REAR DOOR .
- Refer to INSTALLING REAR DOOR TRIM PANEL .
- Refer to INSTALLING THE COVER ON THE DOOR HANDLE .
- Refer to INITIALIZING THE POWER WINDOWS .